VT616 D.C Mounting tape, white (rubber adhesive)

No.                      Description                      Rls/Ctn.        Ft./Ctn.       Lbs./Ctn
VT616               1/16" tk x 1/2" x 108 ft.            24             2,592            13
                       1/16" tk x 3/4" x 108 ft.             16            1,728             13
                       1/16" tk x 1   " x 108 ft.             12            1,296             13
                       1/16" tk x 1 -1/2" x 108 ft.           8              864              13
                       1/16" tk x 2   " x 108 ft.               6              648              13

VT616 double coated foam mounting tape

Product Description

A high 1/16" gauge white cross-linked polyethylene foam coated both sides with a high tack permanent bonding rubber-based adhesive and protected with a release
treated #60 paper liner.

Features

Same features as VT632, but in a 1/16" gauge

Applications

Same as VT632 except the VT616 is recommended where additional bondline thickness is required.

Performance Values

Property                                       Averrage Values                    Test Method

180° Peel Adhesion                        100 oz./ in. of width                PSTC-3
Rolling Ball Tack                             15 cm                                   PSTC-6
Shear                                           140 hours+                            PSTC-7
Elongation                                     300%                                   PSTC-31
Tensile                                         4 lb./in. width                         PSTC-31
Gauge                                          6.25 mil (without liner)             PSTC-33
Temperature Performace                  low -20°F
Range                                          high +180°

The performance data shown here is reported as the average value of several tests conducted under controlled laboratory conditions. These values are provided for comparison only and are not intended for specification purposes and do not constitute a performance guarantee. Purchasers should determine, prior to use, the suitability of these products of their end use applications