VT608 D.C mounting tape, white (rubber adhesive)

No.                           Description                       Rls/Ctn.         Ft./Ctn.           Lbs./Ctn
VT608                   1/8" tk x 1/2" x 54 ft.                24                1,296               7
                           1/8" tk x 3/4" x 54 ft.                 16                  864               7
                           1/8" tk x 1" x 54 ft.                    12                  648               7
                           1/8" tk x 1 -1/2" x 54 ft.               8                  432               7
                           1/8" tk x 2" x 54 ft.                      6                  324               7

VT608 double coated foam mounting tape

Product Description

A 1/8" gauge white cross -linked polyethylene foam coated both sides with a high tack permanent bonding rubber -based adhesive and protected with a release treated 60 # paper liner.

Features

Same features as VT632, but in a 1/8" gauge

Applications

Same as VT632 except the VT608 is recommended where additional bondline thickness is required.

Performance Values

Proberty                                   Average Value                           Test Method

Adhesion                              100 oz./in. of width                        PSTC-3
Tack                                               15 cm                               PSTC-6
Shear                                         140 hours plus                         PSTC-7
Elongation                                        300%                                PSTC-31
Tensile                                 6 lb./ in.width                                PSTC-31
Gauge                                   .125 mils(1/8")                              PSTC-33
                                          (without liner)
Temperature Performance Range  low-20°F
                                             high +180°F

The performance date shown here is reported as the average value of several tests conducted under controlled laboratorn conditions. These values are provided for comparison only and are not intended for specification purpose and do not constitute a performance guarantee. Purchasers should determine, prior to use, the suitability of these products for their particular end use application.